I have a few hobbies these days, but my main one is probably brewing beer.
Since I tend to make a fair bit I built myself a keg fridge out of a chest freezer, aka a keezer.
Pretty simple on the outside.
I put the fonts off to one side in case a decide to add a third one since I can squeeze in 12 kegs.
Inside looks a little more complicated but it's very straight forward.
I've got a few secondary regulators so I can have soft drink and soda water and higher carbonation levels.
I used to put premixed spirits on tap, but that's pretty dangerous!
I used an old video card fan to cool the fonts to help with first pour foam.
I started with a digital tap list, but it was pretty hard to read. It would be better on a large TV.
Then I decided to take up another hobby and get in to 3D printing, so I made some tap handles.
They turned out alright, it even prints the thread!
The black numbers I don't use any more. It was an early idea that I wasn't a fan of.
Then someone wanted to buy a bunch of handles off me in all different colours.
The rainbow isn't what I would go for but he seemed stoked with it.
Anyone else got a kegerator/keezer?